Kubota B2910 User Manual

1 ENGINE
(5) Connecting Rod
B2410 • B2710 • B2910 WSM, 12271
11790F10090
The connecting rod (2) is used to connect the piston
with the crankshaft.
The big end
of the connecting rod has a crankpin
bearing
(3) (split type) and the small end has a small end
bushing
(1) (solid type).
(1) Small End Bushing (3) Crankpin Bearing
(2) Connecting Rod
11790M10060
(6) Camshaft
11900F10010
(7) Fuel Camshaft
The camshaft (3) is made of special cast iron, and the
journal and cam sections are chilled to resist wear.
The journal sections are force-lubricated.
(1) Cam Gear (3) Camshaft
(2) Camshaft Stopper
11900M10050
The fuel camshaft (2) controls the reciprocating
movement of the injection pump.
The fuel camshaft
is made of carbon steel and the
cam sections are quenched and tempered to provide
greater wear resistance.
12490F10010
2
(1) Injection Pump Gear
(2) Fuel Camshaft
1-M4
(3) Fuel Feed Pump Cam
12271M10010

Kubota B2910 Specifications

General

Fuel Type	Diesel
Transmission Type	Hydrostatic
Hydraulic System	Open center
3-Point Hitch	Category I
Lift Capacity	1, 323 lbs (600 kg)
Drive	4WD
Engine Type	Diesel, 4-cycle, liquid-cooled
Horsepower	30 hp
Number of Gears	Infinite (3 ranges)
Wheelbase	63 inches
PTO Horsepower	22 hp