Kubota B2910 User Manual

9 ELECTRICAL SYSTEM
(4) Safety Switch
82410 • 82710 • 82910 WSM, 12271
Safety Switch Continuity
1. Remove the safety switch leads.
2. Connect the circuit tester to the safety switch leads.
3. Measure the resistance between leads.
4. If the safety switch is defective, replace
it.
Resistance (Across
When switch push is
oohm
pushed
switch terminal) of (1),
When switch push is
(2) and (4)
released
Infinity
When switch push is
Infinity
Resistance (Across
pushed
switch terminal) of (3)
When switch push is
oohm
released
(1) Safety Switch for Clutch Pedal
(2) Safety Switch for PTO Gear Shift
Lever
9-S10
(3) Safety Switch for Range Gear Shift
Lever(Only 82710 Affected Serial
No.: below 15496)
(4) Safety Switch for HST
12271890040

Kubota B2910 Specifications

General

Fuel Type	Diesel
Transmission Type	Hydrostatic
Hydraulic System	Open center
3-Point Hitch	Category I
Lift Capacity	1, 323 lbs (600 kg)
Drive	4WD
Engine Type	Diesel, 4-cycle, liquid-cooled
Horsepower	30 hp
Number of Gears	Infinite (3 ranges)
Wheelbase	63 inches
PTO Horsepower	22 hp