NETGEAR M4100 Series User Manual

Configure System Information
108
M4100 Series Managed Switch
8. Use Admin Mode to specify whether the ISDP service is to be Enabled or Disabled.
The default value is Enabled.
9. Use T
imer to specify the period of time between sending new ISDP packets.
The range is 5 to 254 seconds. The default value is 30 seconds.
10. Use Hold T
ime to specify the hold time for ISDP packets that the switch transmits.
The hold time specifies how long a receiving device should store information sent in the
ISDP packet before discarding it.
The range 10 to 255 seconds. The default value is 180
seconds.
11. Select the Version 2
Advertisements Disable or Enable radio button.
This enables or disables the sending of ISDP version 2 packets from the device. The
default value is Enable.
12. Click the APPL
Y button.
Your settings are saved.
The following table describes the ISDP Basic Global Configuration fields.
Table 32. ISDP Basic Global Configuration
Field Description
Neighbors table last time changed Specifies the last time the neighbors table changed.
Device ID Displays the device ID of this switch.
Device ID format capability Displays the device ID format capability.
Device ID format Displays the device ID format.
Configure Advanced Global ISDP Settings
 To configure global ISDP settings:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser
.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.

NETGEAR M4100 Series Specifications

General

Brand	NETGEAR
Model	M4100 Series
Category	Switch
Language	English