NETGEAR M4100 Series User Manual

Configure System Information
115
M4100 Series Managed Switch
Configure the Timer Schedule
 To configure the timer schedule:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser
.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System > T
imer Schedule > Advanced > Schedule Configuration.
8. T
o select a timer schedule or create a new schedule, specify the following settings:
• T
imer Schedule Name.
• T
imer Schedule Type (Absolute or Periodic).
• T
imer Schedule Entry.
9. T
o configure the timer schedule, complete these fields:
• T
ime Start. The time when the schedule operation is started. This field is the required
field. If no time is specified, the schedule does not start running.
• T
ime End. The time of the day when the schedule operation is terminated.
• Date Start.
The schedule start date. If no date is specified, the schedule starts
running immediately.
• Date Stop.
The schedule termination date. If no end date selected, the schedule
operates indefinitely.

NETGEAR M4100 Series Specifications

General

Brand	NETGEAR
Model	M4100 Series
Category	Switch
Language	English