NETGEAR M4100 Series User Manual

Configure System Information
47
M4100 Series Managed Switch
The fields in the following table are visible only when Summer Time is Non Recurring.
Table 11. Summer Time Nonrecurring Configuration
Field Description
Begins At The fields under this are used to configure the Start values for the date
and time.
• W
eek. This field is used to configure the start week.
• Day
. This field is used to configure the start day.
• Month.
This field is used to configure the start month.
• Hours. This
field is used to configure the start hours.
• Minutes.
This field is used to configure the start minutes.
Ends At The fields under this are used to configure the End values for the date
and time.
• W
eek. This field is used to configure the end week.
• Day
. This field is used to configure the end day.
• Month.
This field is used to configure the end month.
• Hours.
This field is used to configure the end hours.
• Minutes.
This field is used to configure the end minutes.
Offset This field is used to configure the recurring offset.
Zone This field is used to configure the Zone.
9. Click the APPLY button.
The settings are sent to the switch. Configuration changes take effect immediately. These
changes are not retained across a power cycle unless you save the configuration. See
Save Configuration on page 405.
Configure DNS
You can configure the information about DNS servers that the network uses and how the
switch operates as a DNS client.
 To configure DNS:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser
.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.

NETGEAR M4100 Series Specifications

General

Brand	NETGEAR
Model	M4100 Series
Category	Switch
Language	English