NETGEAR M4100 Series User Manual

Configure Switching Information
179
M4100 Series Managed Switch
7. Select Switching Multicast  MLD Snooping  Multicast Router VLAN Configuration.
8. Select the interface.
9. In the VLAN ID list, select the VLAN ID.
10. In the Multicast Router list, select Enable or Disable.
This enables or disables the multicast router for the VLAN ID.
Configure the MLD Snooping Querier
You can configure the parameters for the MLD snooping querier. Only a user with Read/Write
access privileges can change the data on this screen.
 To configure the MLD snooping querier:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser
.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.

NETGEAR M4100 Series Specifications

General

Brand	NETGEAR
Model	M4100 Series
Category	Switch
Language	English