NETGEAR M4100 Series User Manual

Configure Switching Information
177
M4100 Series Managed Switch
6. Click the Login button.
The web management interface menu displays.
7. Select Switching
 Multicast  MLD Snooping  MLD VLAN Configuration.
8. Select VLAN ID check boxes for VLAN IDs for which MLD snooping is enabled.
9. In the Admin Mode list, select Enable to enable MLD snooping for the specified VLAN ID.
10. Use Fast Leave
Admin Mode to enable or disable the MLD snooping Fast Leave Mode for
the specified VLAN ID.
11. In the Group Membership Interval field, set the value for group membership interval of
MLD snooping for the specified VLAN ID.
The valid range is (Maximum Response Time + 1) to 3600.
12. In the Maximum Response T
ime field, set the value for maximum response time of MLD
snooping for the specified VLAN ID.
The valid range is 1 to (Group Membership Interval – 1). Its value should be less than the
group membership interval value.
13. In the Multicast Router Expiry T
ime field, set the value for the multicast router expiry time
of MLD snooping for the specified VLAN ID.
The valid range is 0 to 3600.
Configure a Multicast Router
 To configure a multicast router:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser
.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.

NETGEAR M4100 Series Specifications

General

Brand	NETGEAR
Model	M4100 Series
Category	Switch
Language	English