NETGEAR M4100 Series User Manual

Configure System Information
66
M4100 Series Managed Switch
View DHCP Bindings Information
 To view the DHCP Bindings information:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser
.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System > Services > DHCP Server > DHCP Bindings Information.
8. Select one of the following:
• All Dynamic Bindings to specify all dynamic bindings.
• Specific Dynamic Binding to specify a dynamic binding.
DHCPACK Specifies the number of DHCPACK messages sent by the DHCP
server.
DHCPNAK Specifies the number of DHCPNAK messages sent by the DHCP
server
.
Table 17. DHCP server statistics (continued)
Field Description

NETGEAR M4100 Series Specifications

General

Brand	NETGEAR
Model	M4100 Series
Category	Switch
Language	English