Configure Switching Information
140
M4100 Series Managed Switch
factory default is 1000 centiseconds (10 seconds). An instance of this timer exists for
each GARP participant for each port.
Auto-VoIP Overview
The Auto-VoIP feature enables manual and auto assignment of VoIP phone traffic to a
special VLAN (such as, voice VLAN), allowing the assignment of special QoS parameters to
that traffic, giving it high priority services.
Configure Protocol-Based Port Settings
 To configure protocol-based port settings:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Switching > Auto-VoIP > Protocol-basedï€ ï€¾ Port Settings.
To Next Page
Loading...
Need help?
General