wsm M6060 User Manual

ENGINE
M6060, M7060, WSM
1-S44
Fan Drive Pulley
1. Mount a flywheel stopper (1) on the flywheel (2).
2. Remove the crankshaft screw (4).
3. Remove the fan drive pulley (3).
(When reassembling)
• Tighten the crankshaft screw (4) to specified torque after
applying engine oil.
9Y1210828ENS0061US0
(7) Water Pump and Oil Cooler
Water Pump (If necessary)
1. Remove the water pump (1).
(When reassembling)
• When mounting the water pump (1), use the new water pump
gasket.
9Y1210828ENS0062US0
Oil Cooler
1. Remove the water pipe (2).
2. Remove the oil filter cartridge (1).
3. Remove the oil cooler joint screw (3).
4. Remove the oil cooler (4).
9Y1210828ENS0063US0
Tightening torque Crankshaft screw
255 to 274 N·m
26.0 to 28.0 kgf·m
188 to 202 lbf·ft
(1) Stopper
(2) Flywheel
(3) Fan Drive Pulley
(4) Crankshaft Screw
(1) Water Pump
Tightening torque Oil cooler joint screw
40 to 44 N·m
4.0 to 4.5 kgf·m
29 to 32 lbf·ft
(1) Oil Filter Cartridge
(2) Water Pipe
(3) Oil Cooler Joint Screw
(4) Oil Cooler
KiSC issued 08, 2013 A

wsm M6060 Specifications

General

Brand	wsm
Model	M6060
Category	Tractor
Language	English