wsm M6060 User Manual

TRANSMISSION
M6060, M7060, WSM
2-S25
[2] PREPARATION FOR SEPARATING EACH BLOCK
(1) Lubricant and Coolant
Draining Transmission Fluid and Fuel
1. See page 3-S4.
9Y1210828TRS0017US0
(2) 4WD Propeller Shaft and Power Steering Hose
Propeller Shaft
1. Slide the propeller shaft cover (3) after removing the screw (8).
2. Tap out the roll pins (2) and then slide the coupling (1) to the
rear.
(When reassembling)
• Apply grease to the splines of the propeller shaft (5) and pinion
shaft.
• Tap in the roll pins (2) as shown in figure.
9Y1210828TRS0027US0
Power Steering Hose
1. Disconnect both power steering hoses (2) from power steering
cylinder (1).
(When reassembling)
• Connect the power steering hose with ID tape (3) to the R.H..
9Y1210828TRS0028US0
(1) Coupling
(2) Roll Pin
(3) Propeller Shaft Cover
(4) Roll Pin
(5) Propeller Shaft
(6) Cover
(7) Coupling
(8) Screw
Tightening torque
Power steering hose
retaining nut
22.6 to 27.5 N·m
2.3 to 2.8 kgf·m
16.6 to 20.3 lbf·ft
(1) Power Steering Cylinder
(2) Power Steering Hose
(3) ID Tape
KiSC issued 08, 2013 A

wsm M6060 Specifications

General

Brand	wsm
Model	M6060
Category	Tractor
Language	English