GENERAL
M6060, M7060, WSM
G-21
7. CHECK AND MAINTENANCE
• Be sure to check and service the tractor on a flat place with engine shut off, the parking brake on and
chock the wheels.
9Y1210828GEG0010US0
[1] DAILY CHECK
To prevent trouble from occurring, it is important to know the condition of the tractor. Check the following items
before starting.
Checking
• Check areas where previous trouble was experienced.
• Walk around the tractor.
1. Check the tire pressure, and check for wear and damage.
2. Check for oil and water leak.
3. Check the engine oil level.
4. Check the transmission fluid level.
5. Check the coolant level.
6. Check the condition of ROPS attaching hardware. (ROPS model).
7. Check the washer liquid level. (CABIN model)
8. Check the water separator.
9. Check the air cleaner evacuator valve.
10. Check the dust indicator.
11. Check and clean the radiator screen, grill and oil cooler, battery mount (ROPS model).
12. Check and clean the radiator screen, grill, oil cooler and battery mount (CABIN model).
13. Check and clean the air conditioner condenser screen. (CABIN model)
14. Check the DPF muffler.
15. Check the nuts of tires are tight.
16. Check the number plate or SMV emblem for damage and replace as necessary if equipped.
17. Care of danger, warning and caution labels.
18. Clean around the exhaust manifold and the muffler of the engine.
19. Check and refueling.
• While sitting in the operator's seat.
1. Check the throttle pedal, brake pedal and clutch pedal.
2. Check the throttle lever and shuttle lever.
3. Check the parking brake.
4. Check the steering wheel.
5. Check the seat belt.
• Turning the key switch.
1. Check the performance of the easy checker lights.
2. Check the head lights, turn signal lights, hazard lights and other light equipment. Clean if necessary.
3. Check the performance of the meters and gauges.
• Starting the engine.
1. Check to see that the lights on the easy checker go off.
2. Check the color of the exhaust gas.
3. Check the brakes for proper operation.
9Y1210828GEG0011US0