To Next Page

To Previous Page

TRANSMISSION

M6060, M7060, WSM

2-S44

(2) PTO Clutch Pack

Removing PTO Clutch Pack and Holder

1. Pull out the pin (2) with sliding hammer (3). (See page G-74.)

2. Remove the hydraulic pump drive gear (1).

3. Remove the PTO clutch holder mounting screws.

4. Remove the PTO clutch (4) with holder (5).

(When reassembling)

9Y1210828TRS0068US0

Tightening torque

PTO clutch holder

mounting screw

23.5 to 27.4 N·m

2.4 to 2.8 kgf·m

17.4 to 20.3 lbf·ft

(1) Gear

(2) Pin

(3) Sliding Hammer

(4) PTO Clutch

(5) Holder

KiSC issued 08, 2013 A

wsm M6060 User Manual

Questions and Answers: