wsm M6060 - Recirculation;Fresh Air Motor

CABIN
M6060, M7060, WSM
9-S30
(9) Recirculation/Fresh Air Motor
Recirculation/Fresh Air Motor Checking
1. Make sure whether the recirculation/fresh air selection switch
(2) is damaged. (See page 9-S27.)
2. Turn the main switch to "ON" position.
3. Turn the blower switch at 1 position.
4. Push the recirculation/fresh air selection switch to
"Recirculation" position.
5. If the motor does not move, replace it.
9Y1210828CAS0050US0
(1) Recirculation/Fresh Air Motor
(2) Recirculation/Fresh Air Selection
Switch
(3) Blower Switch
KiSC issued 08, 2013 A