To Next Page

To Previous Page

TRANSMISSION

M6060, M7060, WSM

2-S9

(2) Engine Start Condition

Engine Start Condition

IMPORTANT

• Before starting the engine, make sure the gear shift lever at

the neutral position.

• Place the PTO lever to the OFF position.

• Apply the parking brake.

1. Check the engine start condition as follows:

NOTE

• Do not touch the shuttle lever (1) when the shuttle lever (1)

is at specified position as shown in figure.

(Reference)

• Position A: Engine start

• Position B: Engine does not start

• Position C: Engine does not start

2. If the engine started at position B and/or C, adjust the shuttle

cable with retaining nut.

9Y1210828TRS0004US0

(1) Shuttle Lever (2) Shuttle Lever Guide

KiSC issued 08, 2013 A

wsm M6060 User Manual

Questions and Answers: