B:12 AK 98 Dialysis Machine - Alarms
HCEN12745 Revision 10.2016
Program version 2.xx
The Mute button is flashing.
The light stops flashing when the alarm is confirmed and/or
the cause of the alarm is corrected.
Medium priority alarms have priority over attentions and
high priority alarms have priority over both medium priority
alarms and attentions. The generated sound and light
always indicates the highest priority of the currently active
alarms.
NOTE!
The minimum alarm sound pressure is preset by an
authorised service technician.
1.1.2 General alarm handling
CAUTION!
There is a potential hazard that the AK 98 dialysis
machine alarms are not heard or evaluated correctly, if
any equipment with a different alarm system or different
alarm preset values is placed in the same location and
distracts the operator.
When an alarm is triggered the alarm message is displayed
and the alarm tab is flashing. If a menu is open an alarm
banner is shown. If any text is visible in the information field
the Alarm tab must be pressed to show the alarm.
When the alarm tab is pressed the Mute button lights up
and the buzzer is muted for 2 minutes.
1.1.3 External alarm
The AK 98 dialysis machine can be connected to an
external alarm unit for alarm signals. When an alarm is
generated, the external alarm unit is activated. The external
alarm is controlled by the indication light on the AK 98
dialysis machine. When the alarm situation ceases, the
external alarm is deactivated.
To Next Page
Loading...
Need help?
General
