Gambro AK 98 Operator's Manual

B:128 AK 98 Dialysis Machine - Attentions
HCEN12745 Revision 10.2016
Program version 2.xx
554 Profiling is not restarted
554 Profiling is not restarted
Check HCO
3
-
setting and press Confirm.
Appears:
When the dialyzer and the blood lines are changed during
treatment, and the treatment is resumed.
Machine actions:
The machine reactivates the previously set bicarbonate
profiling setting.
Operator action:
Check actual profile settings.
1. Press the Fluid button.
2. Select the Cond tab.
3. Press Profiling.
4. Check that the start and stop values for HCO
3
-
are the
correct ones.
If not, select HCO
3
-
and deactivate profiling.
5. Change the values and reactivate profiling as usual
procedure. See Section 7 “Profiling” on pageA:117 in
Operators handbook.
Mute time:
-

Gambro AK 98 Specifications

General

Brand	Gambro
Model	AK 98
Category	Medical Equipment
Language	English