6
D-STAR OPERATION <BASIC>
6-29
“TO” (Destination) setting (Continued)
D Directlyinputting(RPT)
The destination repeater call sign can be directly en-
terede.
Example: Directly input the call sign “JP1YIU”
The following setting is also correct.
Foryourreference:
If the programmed call sign is
duplicated to the repeater list,
the name is displayed. (Only
when the name has been pro-
grammed.)
Touch [DR]. q
Check whether or not “TO” is selected. w
• If “TO” is not selected, touch the “TO” eld.
Touch the “TO” field. e
• Opens the “TO SELECT” screen.
Touch “Direct Input (RPT).” r
• Opens the “DIRECT INPUT (RPT)” screen.
Touch the desired keypad to t select the desired charac-
ter or symbol.
(Example: J)
• A to Z, 0 to 9, / and (Space) are selectable.
• Touch “ab⇔12” to toggle between the Alphabet entry and
Number entry modes.
• Touch [CLR] to delete the selected character, symbol or
number.
• Touch “SPACE” to enter a space.
• Touch [QUICK], and then touch “Switch to Tenkey” to
switch the keyboard type.
Touch [ y ] to move the cursor backwards, or touch
[] to move the cursor forwards.
Repeat steps u t and y to program a call sign of
up to 8 characters, including spaces, and then touch
[ENT].
(Example: First, J, then P, then 1, then Y, then I, then
U, then space, then A.)
• The transceiver returns to the DR screen, and “JP1YIU”
is displayed in “TO.”
• After programming, you can correct the call sign in the
“DIRECT INPUT (RPT)” screen.
• The programmed call sign remains on the “DIRECT IN-
PUT (RPT)” screen, until inputting a new call sign.
“/” is entered.
In this case, the call sign is of a repeater
for a Gateway call.
To Next Page
Loading...
Need help?
General
