8
GPS OPERATION
8-33
Adding or editing GPS memory (Continued)
D EnteringtheGPSgroupname
You can enter a name for each GPS group.
Touch [MENU]. q
Touch “GPS Message.” w
(GPS > GPSMemory)
• If the item is not displayed, touch [∫] or [√] one or more
times to select another page.
Touch the desired group for 1 second. e
Touch “Edit Name.” r
• Opens the “GROUP NAME” screen.
Touch the keypad. t
• Enters the desired character or symbol.
• In the Alphabet entry mode, touch “” to enter an upper
case letter once, or touch “
” to continuously enter upper
case letters. Touch “
” to enter lower case letters.
• Touch [[ab]] or [[12]], and then touch [ab], [12] or [(!"#)] to
select the desired entry mode.
Entry mode
setting window
• Touch “ab⇔12” to toggle between the Alphabet entry and
Number entry modes.
• Touch “SPACE” to enter a space.
• Touch [CLR] to delete the selected character, symbol or
number.
• Touch [QUICK], and then touch “Switch to Tenkey” to
switch the keyboard type.
Selectablecharactersandsymbols
A to Z, a to z, 0 to 9, ! " # $ % & ’ ( ) * + ,
- . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜ (space)
y Touch [] to move the cursor backwards, or touch
[] to move the cursor forwards.
u Repeat steps u and i to enter a GPS group name
of up to 16 characters, including spaces.
After entering, touch [ENT]. i
Example: Home area is entered
To Next Page
Loading...
Need help?
General
