7
D-ST
AR OPERA
TION <AD
V
ANCED>
7-22
Selectingtherepeatergroup1.
Touch [MENU]. q
Touch “Repeater List.” w
(DV Memory > Repeater List)
• If the item is not displayed, touch [∫] or [√] one or more
times to select another page.
• Displays the repeater groups.
e Touch a desired repeater group to add a repeater to.
• Displays the repeater list of the selected repeater group.
Touch a repeater for 1 second. r
• A new repeater will be added below the selected repeater.
t Touch [Add].
• The “REPEATER LIST EDIT (DV Repeater)” screen is
displayed.
Selectingthecommunicationtype2.
Touch [TYPE]. y
Touch the desired type. u
• DV Repeater: Repeater operation in the DV mode.
• DV Simplex: Simplex operation in the DV mode.
• FM Repeater: Repeater operation in the FM mode.
• FM Simplex:
Simplex operation in the FM mode.
Enteringtherepeatername3.
i Touch “NAME.”
• Enters the repeater name edit mode.
Touch the keypad. o
• Enters the desired character or symbol.
• In the Alphabet entry mode, touch “” to enter an upper
case letter once, or touch “
” to continuously enter upper
case letters. Touch “
” to enter lower case letters.
• Touch [[ab]] or [[12]], and then touch [ab], [12] or [(!"#)] to
select the desired entry mode.
Entry mode
setting window
• Touch “ab⇔12” to toggle between the Alphabet entry and
Number entry modes.
• Touch “SPACE” to enter a space.
• Touch [CLR] to delete the selected character, symbol or
number.
• Touch [QUICK], and then touch “Switch to Tenkey” to
switch the keyboard type.
Selectablecharactersandsymbols
A to Z, a to z, 0 to 9, ! " # $ % & ’ ( ) * + ,
- . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜ (space)
!0 Touch [] to move the cursor backwards, or touch
[] to move the cursor forwards.
!1 Repeat steps o and !0 to enter a name of up to 16
characters, including spaces.
!2 After entering, Touch [ENT].
Enteringtherepeatersubname4.
!3 Touch “SUB NAME.
• Enters the repeater sub name edit mode.
• Enter a sub name of up to 8 characters, including spaces.
See ‘3. Entering the repeater name’ for entry details.
!4 After entering, touch [ENT].
Enteringtherepeatercallsign5.
When used for simplex communication, go to
‘8. Setting “USE(FROM)” to be used as an Access
repeater.’
!5 Touch “CALL SIGN.”
• Enters the repeater call sign edit mode.
!6 Touch the desired keypad to select the first digit.
• A to Z, 0 to 9, / and (Space) are selectable.
• Touch “ab⇔12” to toggle between the Alphabet entry and
Number entry modes.
• Touch [CLR] to delete the selected character, symbol or
number.
• Touch “SPACE” to enter a space.
• Touch [QUICK], and then touch “Switch to Tenkey” to
switch the keyboard type.
!7 Touch [] to move the cursor backwards, or touch
[] to move the cursor forwards.
!8 Repeat steps !6 and !7 to enter your call sign of up
to 8 characters, including spaces.
!9 After entering, touch [ENT].
@0 Touch [√].
Information ✓
Be sure to add the repeater node letter in the 8th digit
of the call sign, according to the frequency band shown
below. Note that there are different node letters be-
tween Japanese D-STAR repeaters and repeaters in
other countries.
1200 MHz: A (B in Japan)
430 MHz: B (A in Japan)
144 MHz: C (no D-STAR repeaters in Japan)
Cross band operation between different nodes at the
same repeater site can be made.
☞ Continued on the next page.
Entering new information into the Repeater List (Continued)
D Enteringnewinformationintotherepeaterlist
To Next Page
Loading...
Need help?
General
