7
D-ST
AR OPERA
TION <AD
V
ANCED>
7-8
While two other stations are communicating in the q
DV mode, touch [RX>CS] for 1 second.
• After releasing, beeps sound and the calling station call
sign is announced. (RX>CS Speech function)
• The calling station or call sign of the repeater used is
automatically set.
• When a call sign is not received correctly, error beeps
sound, and no call sign is set.
Touch [MENU]. w
Touch “BK.” e
(DV Set > BK)
• If the item is not displayed, touch [∫] or [√] one or more
times to select another page.
Touch “ON.” r
Touch [MENU]. t
• Closes the Menu screen.
• “BK” appears.
Appears
When both stations are in standby, push [PTT] to y
transmit.
• The LED1 on the microphone lights red.
• “BK” blinks on the station that receives the break-in call.
Release [PTT] to receive. u
Wait for a reply call from the station.
After receiving the reply call, communicate normally. i
To cancel the BK mode, select “OFF” in the “BK” item o
as step r, or turn OFF the power.
HowtouseBreak-in?
While using digital call sign squelch, the squelch never opens (no audio is heard) even if a call is received, unless
your own call sign is specified.
However, when a call including the “BK ON” signal (break-in call) is received, the squelch will open and audio is
heard even if the call is specified for another station.
Station B never hears that Station C
is calling Station A.
•StationCcallingtoStationAwith“BKOFF”
Station A and B
are communicat-
ing using digital
call sign squelch.
Station B also hears that Station C
is calling Station A.
•StationCcallingtoStationAwith“BKON”
Station A and B
are communicat-
ing using digital
call sign squelch.
Station A Station B
Station C
Station A Station B
Station C
BKmodecommunication
The BK (Break-in) function allows you to break into a
conversation, where the two other stations are commu-
nicating with call sign squelch enabled. (Default: OFF)
NOTE: The BK function is automatically turned OFF
when transceiver is turned OFF.
To Next Page
Loading...
Need help?
General
