15
Bluetooth
®
OPERATION
15-13
Connecting to a Bluetooth
®
device
Pairing with the data device (Continued) D
Sendingapairingrequesttothetransceiver 5.
(Android
®
device)
Touch the displayed UT-133’s name to send a pairing y
request.
• The Android
®
device starts to send a pairing request.
• Opens the “Connection request received from ICOM BT-
001. Confirm the following passkey is shown. Passkey:
MMMMM” dialog box on the transceiver.
NOTE:
Depending on the Android
®
device, you may not be
able to pair with the Bluetooth
®
device.
Receivingapairingrequest (Transceiver)6.
When the transceiver receives a pairing request, u
confirm the displayed passkey is the same as yours,
and then, touch [CONFIRM].
• Pairing starts.
Touch “Pairing/Connect.” i
• After the pairing is complete, the Android
®
device name
is displayed on the pairing list.
After the pairing is complete, the
Android
®
device name is displayed
Pairing list
NOTE:
When you pair with the third party’s headset, entering
a PIN code or passkey may be required.
See the instruction manual of the headset for details
to enter a PIN code or passkey.
To Next Page
Loading...
Need help?
General
