5
PRIORITY WATCH
5-7
VFO frequency and a Memory/Bank scan (Continued)
DuringaPrioritywatch4.
Sequentially checks the Memory or Bank channels ev-
ery 5 seconds, while receiving on a VFO frequency.
Example:
Sequentially c
hecks the Memory channels while receiving on 145.000 MHz.
Checks the Memory channels every 5 seconds.
The Memory channels are
sequentially checked.
AppearsAppears
Example:
Sequentially c
hecks Bank channels while receiving on 145.000 MHz.
Checks the Bank channels every 5 seconds.
The bank channels are
sequentially selected.
AppearsAppears
Automatically selects the Memory channel.
Remains in the VFO mode.
Example: For a Memory scan
Whenasignalisreceived5.
•When“ON”isselected.
When a signal is received on the priority channel,
the channel is automatically selected.
The “PRIO” icon blinks on the screen.
- The scan pause timer and resume settings are the
same as for a normal scan. (p. 12-14)
•When“Bell”isselected.
When a signal is received on the priority channel,
a beep sounds and the “
” icon blinks on the
screen.
Blinks
Blinks
Blinks
To Next Page
Loading...
Need help?
General
