Icom ID-5100A Full Manual

12
MENU SCREEN
12-37
CallSign
Call Sign
Sets or views the “UR,” “R1,” “R2,” and “MY” call signs to
use for the DV operation.
When you don’t use the DR function in the DV mode,
sets the desired call signs in this screen.
ForSimplexoperation (DV mode)
“UR” and “MY” call signs can be set.
ForDuplex(repeater)operation(DV mode/DR func-
tion)
Only “MY” call sign can be set when using the DR func-
tion.
<TosetDuplex(repeater)operation>
Example: Making a gateway CQ call to Inage repeat-
er (JP1YJQ A) from the Hirano repeater
(JP3YHH A), in the DV mode.
• Before starting to set the call sign, set the fre-
quency of your access repeater and duplex di-
rection. (See section 7)
Foryourreference:
When the DR function is ON, the repeater call sign
can be automatically set. (p. 12-45)
1. Call sign “R1” setting
In the DV mode, touch “R1” for 1 second. q
Touch “Edit.” w
Touch the keypad to enter the first character. e
• Alphanumeric characters and symbol (“/”) can be en-
tered.
Touch [ r ] to move the cursor backwards, or touch
[] to move the cursor forwards.
Repeat steps t e and r to enter a name of up to 8
characters, including a spaces.
After entering, touch [ENT]. y
2. Gateway “R2” setting
Touch “R2.” q
Touch “GW.” w
To manually enter the call sign, touch “R2” for 1 sec-
ond in step q.
AbouttheRPT2SELECTscreen
NOT USED* For local area call
GW
To select the gateway call sign from the
repeater list.
Repeater
name
To select the repeater that has the
same gateway as the “R1” repeater.
3. Destination “UR” setting
Touch “UR.” q
Touch “Gateway CQ.” w
Touch “11:Japan” (repeater group where your desti- e
nation repeater is listed).
Touch “Inage.” r
To manually enter the call sign, touch “UR” for 1 sec-
ond in step q.
AbouttheYOURSELECTscreen
CQCQCQ
To select “CQCQCQ” to make a non-
call sign specific call.
Gateway CQ
†
To select “Gateway CQ” to make a call
using the repeater list.
Your Call Sign
To select the destination “UR” call sign
using the Your Call Sign memory.
RX History
To select the destination “UR” call sign
using the RX History.
TX History
To select the destination “UR” call sign
using the TX History.
†
Not displayed in the Simplex mode.
CallSignitems
Previous view

Icom ID-5100A Specifications

General

Brand	Icom
Model	ID-5100A
Category	Transceiver
Language	English