6
D-STAR OPERATION <BASIC>
6-18
“FROM”(Accessrepeater)setting
Your access repeater must be set in “FROM” when you
make a call in the DR screen.
You have five ways to set the access repeater.
SearchforarepeaterusingtheDRscanfunction
(p.6-21)
The Normal scan searches for, and stops on, input and output re-
peater frequencies, when a signal is detected.
• The scan will also stop on simplex signals.
The Near Repeater scan searches for up to 20 nearby repeaters by
using your location and the repeater’s location, and then lists them.
You can find only FM repeaters using the Near Repeater (FM)
scan.
Searchforthenearestrepeater(p.6-21)
Searches for the nearest repeater by using your location and the
repeater’s location.
The nearest repeaters in your transceiver’s repeater list are displayed
as the selectable choices.
•Whenyouknowyouraccessrepeater
Fromtherepeaterlist(p.6-20)
When your access repeater is in your transceiver’s repeater list,
you can select it by selecting the repeater area and name, if
entered, or call sign.
•Whenyoudon'tknowwhichrepeateryoucanaccess.
•Whenthe“FROM”dataisstoredintheTXHistory.
SettingfromtheTXHistory(p.6-22)
Select a repeater that you have accessed before, from the TX His-
tory record.
Settingby[DIAL]
Select the preset repeater by rotating [DIAL] while displaying the
DR screen.
Displayed while
rotating [DIAL]
Scanitems
To Next Page
Loading...
Need help?
General
