8
GPS OPERATION
8-3
Whenareceivedsignalcontainspositiondata
When you receive the signal, the RX position infor-
mation is displayed in the RX position window.
After a few seconds, the pop-up window disappears.
When the received signal contains position
data, the RX position indicator is displayed
on the right side of the message.
RX position indicator
If you touch the RX position indicator, the
RX position window appears again.
When a received signal contains position data, the call-
er’s position is displayed on the RX position window.
See page 8-4 for details.
Example: When the signal from JM1ZLK contains posi-
tion data.
You can turn OFF the RX position window to keep it
from appearing. (p. 12-58)
(Display > RX Position Display)
You can turn OFF the RX position indicator to keep it
from appearing. (p. 12-57)
(Display > RX Position Indicator)
To Next Page
Loading...
Need help?
General
