Icom ID-5100A Full Manual

13
OTHER FUNCTIONS
13-4
The Speech function audibly announces the displayed
frequency and operating mode in the VFO, Memory or
Call channel modes, or caller station’s call sign when
using the DR function.
D UsingtheSpeechfunction
• When you push [ ](SPEECH), the Speech function
audibly announces the displayed frequency and op-
erating mode, or the call sign selected in the MAIN
band.
• When you receive a signal in the DV mode, the Speech
function audibly announces the caller station’s call
sign.
• When you touch [RX>CS] for 1 second, and then re-
lease it, the Speech function audibly announces the
station call sign set in the “TO” field.
NOTE:
• When you receive a signal during an announce-
ment, the transceiver cancels the announcement,
and you can hear the received audio.
• If a call is received during an announcement in the
DV mode, the received audio will be muted. If you
are recording the audio, no audio is recorded onto
the SD card. In a mode other than the DV mode,
the received audio will be recorded, even during an
announcement.
ThedetailedsettingsfortheSpeechfunctions
You can set the detailed settings for the Speech func-
tions in the Menu screen.
•RXCallSignSPEECH (p. 12-46)
Set the RX call sign speech function for calls received
in the DV mode.
(SPEECH > RXCallSignSPEECH)
•RX>CSSPEECH (p. 12-46)
Set the RX>CS Speech function that announces the
call sign set in the “TO” field when touching [RX>CS].
(SPEECH > RX>CS SPEECH)
•DIALSPEECH (p. 12-46)
Set the Dial Speech function that announces the fre-
quency or repeater call sign that is selected by rotat-
ing [DIAL].
(SPEECH > DIAL SPEECH)
•MODESPEECH (p. 12-46)
Set the Operating Mode Speech function that an-
nounces the selected operating mode.
(SPEECH > MODE SPEECH)
•SPEECHLanguage (p. 12-46)
Set the speech language to English or Japanese.
(SPEECH > SPEECHLanguage)
•Alphabet (p. 12-47)
Set the Alphabet character announcement to either
“Normal” or “Phonetic Code.”
(SPEECH > Alphabet)
•SPEECHSpeed (p. 12-47)
Set the speech speed to Low (slow) or High (fast).
(SPEECH > SPEECH Speed)
•SPEECHLevel (p. 12-47)
Enter a volume level number between 0 (minimum)
and 9 (maximum) for the voice synthesizer.
(SPEECH > SPEECH Level)
Speechfunction
Previous view

Icom ID-5100A Specifications

General

Brand	Icom
Model	ID-5100A
Category	Transceiver
Language	English