6
D-STAR OPERATION <BASIC>
6-32
Reflector operation
Linking to a reflector (Continued) D
UsingtheTXHistory
The TX History stores the up to 5 reflectors that your
access repeater linked before.
Example: Select the “REF002AL” in the TX History.
Touch [DR]. q
Check whether or not “TO” is selected. w
• If “TO” is not selected, touch the “TO” eld.
Touch the “TO” field. e
• Opens the “TO SELECT” screen.
Touch “Reflector.” r
• Opens the “REFLECTOR” screen.
Touch “Link to Reflector.” t
Touch the reflector that you want to link to. y
(Example: “REF002AL”)
• The transceiver returns to the DR screen.
• “Link to Reector” and “REF002AL” are displayed in
“TO.”
Hold down [PTT] to link to the reflector. u
• The LED1 on the microphone lights red.
D Usingareector
Before using a reflector, be sure to your repeater links
to a reflector.
Touch [DR]. q
Check whether or not “TO” is selected. w
• If “TO” is not selected, touch the “TO” eld.
Touch the “TO” field. e
• Opens the “TO SELECT” screen.
Touch “Reflector.” r
• Opens the “REFLECTOR” screen.
Touch “Use Reflector.” t
• The transceiver returns to the DR screen.
• “Use Reector” and “CQCQCQ” are displayed in “TO.”
Hold down [PTT] to transmit. y
• The LED1 on the microphone lights red.
To Next Page
Loading...
Need help?
General
