17
MAINTENANCE
17-2
ResettingtheCPU
Occasionally, erroneous information will be displayed
when, for example, first applying power. This may be
caused externally by static electricity or by other fac-
tors.
If this problem occurs, turn OFF power.
After waiting a few seconds, turn ON power again. If
the problem is still there, perform a Partial reset or an
All reset.
D Partial Reset
Touch [MENU]. q
Touch “Partial Reset.” w
( Others > Reset > Partial Reset)
• If the item is not displayed, touch [∫] or [√] one or more
times to select the page.
Touch [YES]. e
• The transceiver displays "PARTIAL RESET," then the
partial reset is completed.
A Partial reset resets the operating settings to their
default values (VFO frequency, VFO settings, menu
contents) without clearing the items below:
• Memory channel contents
• Scan Edge contents
• Call channel contents
• Call sign memories
• Message data
• DTMF memory contents
• GPS Memory contents
• Repeater list
To Next Page
Loading...
Need help?
General
