Icom ID-5100A Full Manual

7
D-STAR OPERATION <ADVANCED>
7-29
You can set repeaters as scan skip repeaters. The se-
lected repeaters are then skipped for faster scanning.
You can set the skip setting to all repeaters in the se-
lected repeater group, or to individual repeaters.
When a repeater is specified as a skip repeater, its
“USE (FROM)” setting is automatically set to “NO.” In
this case, the repeater cannot be selected in “FROM”
(Access repeater).
D Individualskipsetting
Touch [MENU]. q
Touch “Repeater List.” w
(DV Memory > Repeater List)
• The repeater groups are displayed.
Touch the repeater group for 1 second where the re- e
peater you set the skip setting is listed.
Touch the repeater for 1 second to be skipped. r
Touch “SKIP.” t
• Displays “SKIP” on the selected repeater.
• Touch the repeater for 1 second again to cancel the skip
setting.
• Touching “SKIP All ON” sets the skip setting to all repeat-
ers in the group.
Appears
SkipsettingfortheDRscan
Groupskipsetting
Touch the repeater group for 1 second, and then
touch “SKIP All ON” to skip the repeaters in the group
during the DR scan.
Foryourreference
When you select “Repeater List” in the “FROM SE-
LECT” screen, you can set the skip setting as de-
scribed to the left.
Foryourreference
When “FROM” is selected, touch [SKIP] in the F-2
menu for 1 second to set the skip setting.
Touch [SKIP] again to clear the skip setting.
Rotate [DIAL] to select another repeater, and you can
set the skip setting.
Touch [ON] to set
the skip setting.
(“SKIP” appears)
“FROM” is selected
Previous view

Icom ID-5100A Specifications

General

Brand	Icom
Model	ID-5100A
Category	Transceiver
Language	English