7
D-ST
AR OPERA
TION <AD
V
ANCED>
7-37
You can check the repeater list default values using the
CS-5100 c l o n i n g s o f t w a r e , if you download the ICF
(Icom Cloning Format) file, including the default repeat-
er list from the Icom website.
http://www.icom.co.jp/world/support/download/firm/
index.html
When you open the downloaded ICF file with the CS-
5100, the repeater list default values are displayed on
the screen.
To reset the programmed repeater list to the default,
write the ICF file to the transceiver using the CS-5100*
1
,
or copy the ICF file to the SD card*
2
, and then write to
the transceiver.
*
1
See the CS-5100 instruction manual when using the
CS-5100.
*
2
See Section 9 when using the SD card.
D Openingthedefaultrepeaterlist
Start the CS-5100. q
• See the CS-5100 instruction manual for how to install the
software.
Click [Open] to open the ICF file. w
Click the [Repeater list] folder to show the default e
repeater list.
Double-
click
Click
You can see the
default values of
the repeater list.
When the ICF file is opened on the CS-5100.
Abouttherepeaterlistdefaultvalues
Select
To Next Page
Loading...
Need help?
General
