6
D-STAR OPERATION <BASIC>
6-14
MakingaGatewayRepeatercall
A Gateway call can be made when a destination re-
peater is selected in “TO” (Destination).
• “ ” appears when the repeater does not connect
to the gateway.
What is a Gateway Repeater Call?? ✓
To call through your local area (access) repeater, re-
peater gateway, and the Internet to your desired desti-
nation repeater.
Set “FROM” (Access repeater)1.
Touch [DR]. q
Check whether or not “FROM” is selected. w
• If “FROM” is not selected, touch the “FROM” eld.
Touch the “FROM” field. e
• Opens the “FROM SELECT” screen.
Touch “Repeater List. r ”
• Opens the “REPEATER GROUP” screen.
Touch the repeater group where your access repeat- t
er is listed. (Example: “11: Japan”)
Touch your access repeater. (Example: “Hirano”) y
• Returns to the DR screen, and the selected repeater
name is displayed in “FROM.”
Set“TO”(Destination)2.
Touch the “TO” field. u
• Check whether “TO” is selected.
Touch the “TO” field again. i
• Opens the “TO SELECT” screen.
Touch “Gateway CQ. o ”
• Opens the “REPEATER GROUP” screen.
!0 Touch the repeater group where your desired desti-
nation repeater is listed. (Example: “11: Japan”)
!1 Touch your destination repeater.
(Example: “Hamacho”)
• Returns to the DR screen, and the selected repeater
name is displayed in “TO.”
Holddown[PTT]totransmit3.
• The LED1 on the microphone lights red.
Foryourreference:
The Gateway CQ call is used to call any repeater, but
you can call a specific station by simply saying their
call sign.
To Next Page
Loading...
Need help?
General
