7
D-ST
AR OPERA
TION <AD
V
ANCED>
7-11
If you receive an FM signal while in the DV mode, the
“DV” and “FM” icons alternately blink to indicate the re-
ceived signal is FM.
When the DV Auto Detect function is turned ON, the
transceiver automatically selects the FM mode to tem-
porarily monitor the signal. (Default: OFF)
• Regardless of this setting, the “DV” and “FM” icons alternate-
ly blink if you receive an FM signal while in the DV mode.
Touch [MENU]. q
Touch “DV Auto Detect.” w
(DV Set > DV Auto Detect)
• If the item is not displayed, touch [∫] or [√] one or more
times to select another page.
Touch “ON.” e
Touch [MENU]. r
• Closes the Menu screen.
• When an FM signal is received while in the DV mode,
the “DV” and “FM” icons sequentially blink, and the trans-
ceiver receives the signal in the FM mode.
Foryourreference:
When digital call sign squelch (DSQL) or digital code
squelch (CSQL) is selected, the transceiver does not
receive FM signals, even if this function is ON.
You can silently wait for calls from others.
These icons alter-
nately blink
• • •
<WhenanFMsignalisreceivedwhileintheDVmode>
• DV Auto Detect function: OFF
The “DV” and “FM” icons alternately blink, but the audio
cannot be heard.
The audio cannot
be heard.
Thanksforthe
niceQSO• • •
• DV Auto Detect function: ON
The “DV” and “FM” icons alternately blink, and the au-
dio can be heard.
The audio can
be heard.
These icons alter-
nately blink
AutomaticDVdetection
To Next Page
Loading...
Need help?
General
