12
MENU SCREEN
12-44
RXBass (Default:Normal)
DV Set > Tone Control > RX Bass
Set the received audio bass filter level to Cut, Normal
or Boost.
• Cut: Reduces the low frequencies
• Normal: Normal tone balance
• Boost: Increases the high frequencies
RXTreble (Default:Normal)
DV Set > Tone Control > RX Treble
Set the received audio treble filter level to Cut, Normal
or Boost.
• Cut: Reduces the high frequencies
• Normal: Normal tone balance
• Boost: Increases the high frequencies
RXBassBoost (Default:OFF)
DV Set > Tone Control > RX Bass Boost
Turn the received audio Bass Boost function ON or
OFF.
This function is separate from the “Boost” setting of the
RX Bass.
• OFF: Turns OFF the function.
• ON: This function boosts the received audio bass.
TXBass (Default:Normal)
DV Set > Tone Control > TX Bass
Set the transmit audio bass filter level to Cut, Normal
or Boost.
• Cut: Reduces the low frequencies
• Normal: Normal tone balance
• Boost: Increases the low frequencies
TXTreble (Default:Normal)
DV Set > Tone Control > TX Treble (TX Treble)
Set the transmit audio treble filter level to Cut, Normal
or Boost.
• Cut: Reduces the high frequencies
• Normal: Normal tone balance
• Boost: Increases the high frequencies
Auto Reply (Default:OFF)
DV Set > Auto Reply
Set the automatic reply function to ON, OFF, Voice, Po-
sition (Main Only), or Position (Main/Sub).
This function automatically replies to a call addressed
to your own call sign, even if you are away from the
transceiver.
• OFF: Turns OFF the function.
• ON: Replies with your own call sign. (No audio re-
ply is sent)
• Voice: Replies with your call sign and any Auto Reply
message recorded on the SD (up to 10 sec-
onds).
If no SD card is inserted, or no message is re-
corded, only your call sign is transmitted. The
transmitted audio can be monitored.
• Position (Main Only):
Replies with your own call sign and transmits
your position using the internal GPS receiver.
In the Dualwatch mode, automatically replies
only when the signal is received on the MAIN
band.
- When the “GPS Select” item is set to “OFF” or
“Manual,” the internal GPS receiver is temporarily
turned ON.
• Position (Main/Sub):
Replies with your own call sign and transmits
your position using the internal GPS receiver.
In the Dualwatch mode, automatically replies
when the signal is received on either the Main
or Sub band.
- When the “GPS Select” item is set to “OFF” or
“Manual,” the internal GPS receiver is temporarily
turned ON.
NOTE:
• When “ON” or “Voice” is selected, the Automatic re-
ply function is automatically turned OFF when you
push [PTT].
• When “Position (Main Only)” or “Position (Main/
Sub)” is selected, the Automatic reply function is
not turned OFF, even if you push [PTT].
DV Data TX (Default:Auto)
DV Set > DV Data TX
Select whether to manually or automatically transmit
slow-speed data.
• PTT: Push [PTT] to manually transmit the data.
• Auto: When data is input from a PC through the [DATA]
jack, the transceiver automatically transmits it.
DVSetitems
To Next Page
Loading...
Need help?
General
