Icom ID-5100A Full Manual

12
MENU SCREEN
12-57
Displayitems
Backlight (Default:8)
Display > Backlight
Set the backlight brightness level to between 1 (Dark)
and 8 (Bright).
AutoDimmer (Default:OFF)
Display > Auto Dimmer
This function sets the Auto Dimmer operation.
• OFF: Auto Dimmer function is turned OFF.
The backlight is turned ON continuously
while the transceiver is turned ON.
• Auto-OFF: The backlight is automatically turned ON
when touching the touch panel or rotat-
ing [DIAL].
The backlight is automatically turned
OFF after the set time of inactivity in the
Auto Dimmer Timer.
• Auto-1 to Auto-7:
The backlight is automatically turned ON
when touching the touch panel or rotat-
ing [DIAL].
The backlight automatically returns to
the 1 to 7 set level after the Auto Dimmer
Timer set time ends.
AutoDimmerTimer (Default:5sec)
Display > Auto Dimmer Timer
Set the backlight lighting time period to between 5 and
10 seconds.
• 5sec: The Auto dimmer function automatically acti-
vates after 5 seconds of inactivity.
• 10sec: The Auto dimmer function automatically acti-
vates after 10 seconds of inactivity.
TouchOperation(Dimmed)
(Default:Brighten&Action)
Display > Touch Operation (Dimmed)
Select the transceiver’s action when you touch the
screen while the Auto dimmer is activated.
• Brighten: Cancels the Auto dimmer, and the
backlight turns ON.
• Brighten & Action: Cancels the Auto dimmer, and the
backlight turns ON, then activates
the touch operation.
LCDContrast (Default:8)
Display > LCD Contrast
Set the contrast of the LCD.
Set the level to between 1, the lowest contrast, and 16,
the highest.
RXCallSign (Default:Normal)
Display > RX Call Sign
When a call is received, select whether or not to display
the call sign and the message of the caller station.
• OFF: The caller station’s call sign and message
are not displayed.
• Normal: The caller station’s call sign and message
scroll only once across the display.
• RX Hold: The caller station’s call sign and message
scroll once, and then only the call sign is dis-
played until the signal disappears.
• Hold: The caller station’s call sign and message
scroll only once, and then only the call sign
is displayed until the signal disappears.
When the signal disappears, the call sign
and the message are alternately displayed,
each for 2 seconds.
NOTE:When this item is set to “Normal,” “RX Hold”
or “Hold,” and if you program the caller station’s call
sign and name in Your Call Sign screen, the screen
displays the programmed name after the call sign.
RXPositionIndicator (Default:ON)
Display > RX Position Indicator
Select whether or not to display “
” (RX position in-
dicator) when the signal received in the DV mode con-
tains position data.
• OFF : Displays no indicator even though the received
signal contains position data.
• ON : Displays the indicator when the received signal
contains position data.
NOTE: When the “RX Call Sign Display” is set to
“OFF,” the indicator is not displayed even though the
received signal contains position data.
Previous view

Icom ID-5100A Specifications

General

Brand	Icom
Model	ID-5100A
Category	Transceiver
Language	English