5
PRIORITY WATCH
5-5
DuringaPrioritywatch4.
Checks the selected priority channel every 5 seconds,
while receiving on a VFO frequency.
VFO frequency and a priority channel (Continued)
Example: For a Memory channel
Example:
Checks Memory channel “000” while receiving on 145.000 MHz.
Appears Appears
Checks the Memory channel every 5 seconds.
Priority channel
Example:
Checks Bank channel “A00” while receiving on 145.000 MHz.
Appears Appears
Priority channel
Checks the Bank channel every 5 seconds.
Example:
Checks Call channel “C0 (144)” while receiving on 145.000 MHz.
Appears Appears
Priority channel
Checks the Call channel every 5 seconds.
Blinks
Blinks
Automatically selects
the priority channel.
Blinks
Remains in the VFO mode.
Whenasignalisreceived5.
•When“ON”isselected.
When a signal is received on the priority channel,
the channel is automatically selected.
The “PRIO” icon blinks on the screen.
- The scan pause timer and resume settings are the
same as for a normal scan. (p. 12-14)
•When“Bell”isselected.
When a signal is received on the priority channel,
a beep sounds and the “S” icon blinks on the
screen.
To Next Page
Loading...
Need help?
General
