6
D-STAR OPERATION <BASIC>
6-15
Callinganindividualstation
You can make a call to an individual station when the
station call sign is selected in “TO” (Destination).
When you call an individual station call sign through a
gateway, your call is automatically sent to the last re-
peater that the station accessed. So, even if you don’t
know where the station is, you can make a call using
call sign routing.
Set “FROM” (Access repeater)1.
Touch [DR]. q
Check whether or not “FROM” is selected. w
• If “FROM” is not selected, touch the “FROM” eld.
Touch the “FROM” field. e
• Opens the “FROM SELECT” screen.
Touch “Repeater List. r ”
• Opens the “REPEATER GROUP” screen.
Touch the repeater group where your access repeat- t
er is listed. (Example: “11: Japan”)
Touch your access repeater. (Example: “Hirano”) y
• Returns to the DR screen, and the selected repeater
name is displayed in “FROM.”
Set“TO”(Destination)2.
Touch the “TO” field. u
• Check whether “TO” is selected.
Touch the “TO” field again. i
• Opens the “TO SELECT” screen.
Touch “Your Call Sign. o ”
• Opens the “YOUR CALL SIGN” screen.
!0 Touch the destination station. (Example: “TOM”)
• Returns to the DR screen, and the selected station name
is displayed in “TO.”
Holddown[PTT]totransmit3.
• The LED1 on the microphone lights red.
To Next Page
Loading...
Need help?
General
