3
MEMORY OPERATION
3-6
After setting a frequency in the VFO mode, you can
write it into a Memory channel.
When writing into a channel, you can select the des-
tination channel between your desired channel or the
lowest blank channel.
Memory channels 002 to 999 are blank as the default.
D Writingintotheselectedchannel
Example: Writing 146.030 MHz into Memory channel 18.
Touch the Memory channel number. q
• Opens the Mode setting window.
Touch [VFO]. w
• Selects the VFO mode.
Rotate [DIAL] to set 146.030 MHz. e
Touch the Function group icon one or more times. r
• Selects the F-1 menu.
Touch [MW]. t
Touch [Write to New CH]. y
• Opens the “WRITE” screen.
Touch [CH SEL]. u
Touch “018.” i
NOTE: If you select a pre-entered channel, the
previous channel content will be overwritten.
• Call channels are also selectable.
WritingintoaMemorychannel
Touch [WRITE]. o
!0 Touch [YES].
• Beeps sound.
• Writes into the selected Memory channel, and returns to
the VFO mode.
D Writingintoablankchannel
Example: Writing 146.030 MHz into a blank channel.
Touch the Memory channel number. q
• Opens the Mode setting window.
Touch [VFO] to select the VFO mode. w
Rotate [DIAL] to set 146.030 MHz. e
Touch the Function group icon one or more times. r
• Selects the F-1 menu.
Touch [MW] for 1 second. t
• Writes into the smallest blank, and returns to the VFO
mode.
To Next Page
Loading...
Need help?
General
