9
USING AN SD CARD
9-6
Memory channels, Menu screen item settings, and re-
peater lists can be saved on an SD card.
Saving data settings on an SD card allows you to easily
restore the transceiver to its previous settings, even if
an All reset is performed.
For your information ✓
Data settings are saved in the “icf” file format that is
used in the CS-5100 cloning software.
The saved data on an SD card can be copied to a PC
and edited with the cloning software.
Data settings can be saved as a new file or to overwrite
an older file.
[Savedasanewle]
SavingthesettingdataontoanSDcard
Touch [MENU]. q
Touch “Save Setting.” w
(SD Card > SaveSetting)
• Opens the SAVE SETTING screen.
• If the item is not displayed, touch [∫] or [√] one or more
times to select the page.
Touch “<<New File>>.” e
• Opens the FILE NAME screen.
• The le name is automatically named in the following
manner; Setyyyymmdd_xx (yyyy: Year, mm: month, dd:
day, xx: serial number)
Example: If a second file is saved on April 1, 2014, the
file is named “Set20140401_02.”
• If you want to change the le name, see “Save with a dif-
ferent file name” (p. 9-7).
Touch [ENT]. r
• Opens the conrmation window “Save le?.”
Touch [YES]. t
• Saves the data settings.
• While saving, a progress bar is displayed, then the SD
CARD screen is displayed after the save is completed.
Touch [MENU] y
• Cancels the Menu screen.
[Overwritingale]
Select the desired file to be overwritten in step ➥ e to
the left.
To Next Page
Loading...
Need help?
General
