Icom ID-5100A Full Manual

4
SCAN OPERATION
4-7
D Settingtheskipfrequencies
The frequencies set as “PSKIP” skip channels are not
scanned.
Start the VFO scan. (p. 4-5) q
• When a signal is received, the scan pauses.
The S-meter shows the
received signal strength.
Blinks
Blinks
Touch the Function group icon one or more times. w
• Selects the F-2 menu.
While the scan is paused, and if you want to skip the e
frequency, touch [SKIP] for 1 second (until 3 beeps
sound).
• When a signal is received during the scan, the transceiv-
er attempts to enter the frequency as a skip channel into
empty memory channel 999.
• The entered memory channel number blinks.
• If channel 999 already has content, the transceiver auto-
matically searches for another blank channel to use.
If no blank memory channel is found, a beep sounds, and
no skip channel is set.
A skip frequency is entered
into channel 999.
Blinks
After the skip channel is set, the scan resumes. r
Settingandclearingtheskipfrequencies
D Clearingtheskipfrequencies
Touch the Memory channel number. q
• Opens the Mode setting window.
Touch [MR]. w
• Selects the Memory mode.
Rotate [DIAL] to select the memory channel you e
want to clear as the skip channel.
Touch the Function group icon one or more times. r
• Selects the F-2 menu.
Touch [SKIP]. t
• Open the skip setting window.
Touch “OFF.” y
• The skip setting is canceled.
“PSKIP” disappears.
Foryourreference:
The skip setting is also cancelled when the memory
channel set as skip channel is deleted.
See page 3-16 for details.
Previous view

Icom ID-5100A Specifications

General

Brand	Icom
Model	ID-5100A
Category	Transceiver
Language	English