Keithley DMM7510 Reference Manual

Section
3: Functions and features Model DMM7510 7½ Digit Graphical Sampling Multimeter
Reference Manual
3-92 DMM7510-901-01 Rev. B / May 2015
Front-panel icon SCPI command
TSP command
Block description
:TRIGger:BLOCk:DIGital:IO (on page 6-196)
trigger.model.setblock() — trigger.BLOCK_DIGITAL_IO (on page
8-
317)
This trigger model
block that sets the
lines on the digital
I/O port high or low
:TRIGger:BLOCk:DIGitize (on page 6-197
)
trigger.model.setblock() — trigger.BLOCK_DIGITIZE (on page
8-
318)
This defines a
trigger block that
makes a
measurement using
a digitize function
:TRIGger:BLOCk:LOG:EVENt (on page 6-198)
trigger.model.setblock() — trigger.BLOCK_LOG_EVENT
(on page
8-320)
This allows you to
log an event in the
event log when the
trigger model is
running
:TRIGger:BLOCk:MEASure (on page 6-199
)
trigger.model.setblock() — trigger.BLOCK_MEASURE (on page
8-
321)
This defines a
trigger block that
makes a
measurement using
a measure function
:TRIGger:BLOCk:NOP (on page 6-200)
trigger.model.setblock() — trigger.BLOCK_NOP (on page 8-322
)
This creates a
placeholder that
performs no action
in the trigger
model; available
only using remote
commands
:TRIGger:BLOCk:NOTify (on page 6-201)
trigger.model.setblock() — trigger.BLOCK_NOTIFY (on page 8-323
)
This defines a
trigger model block
that generates a
trigger event and
immediately
continues to the
next block
:TRIGger:BLOCk:WAIT (on page 6-202)
trigger.model.setblock() — trigger.BLOCK_WAIT (on page 8-325
)
This defines a
trigger model block
that waits for an
event before
allowing the trigger
model to continue

Keithley DMM7510 Specifications

General

Brand	Keithley
Model	DMM7510
Category	Multimeter
Language	English