Keithley DMM7510 Reference Manual

Model DMM7510
7½ Digit Graphical Sampling Multimeter Reference Manual Section 8:
TSP command reference
DMM7510-901-01 Rev. B / May 2015 8-205
Example
print(eventlog.getcount(eventlog.SEV_INFO))
Displays the present number of unread
information messages in the instrument
event log.
If there are three information messages in
the event log, output is:
3
Also see
eventlog.clear() (on page 8-204)
eventlog.next() (on page 8-205)
localnode.showevents (on page 8-227)
Using the event log (on page 2-154)
eventlog.next()
This function returns the oldest unread event message from the event log.
Type TSP-Link accessible
Affected by Where saved Default value
Function
Yes
Usage
eventNumber, message, severity, nodeID, timeSeconds, timeNanoSeconds =
eventlog.next()
eventNumber, message, severity, nodeID, timeSeconds, timeNanoSeconds =
eventlog.next(eventType)
eventNumber
The event number
message
A description of the event
severity
The severity of the event,
• Error: 1
• Warning: 2
•
Information: 4
nodeID
The TSP-Link node where the event occurred or 0 if the event occurred on the local
node
timeSeconds
The seconds portion of the time when the event occurred
timeNanoSeconds
The fractional seconds portion of the time when the event occurred
eventType
Limits the return to specific event log types; set a cumulative integer value that
represents the event log types to:
• Errors only: eventlog.SEV_ERROR or 1
• Warnings only: eventlog.SEV_WARN or 2
• Errors and warnings only: eventlog.SEV_WARN|eventlog.SEV_ERROR or
3
• Information only: eventlog.SEV_INFO or 4
• Errors and information only: eventlog.SEV_INFO|eventlog.SEV_ERROR
or 5
• Warnings and information only:
eventlog.SEV_INFO|eventlog.SEV_WARN or 6
•
All events: eventlog.SEV_ALL or 7

Keithley DMM7510 Specifications

General

Brand	Keithley
Model	DMM7510
Category	Multimeter
Language	English