Keithley DMM7510 Reference Manual

Model DMM7510
7½ Digit Graphical Sampling Multimeter Reference Manual Section 6:
SCPI command reference
DMM7510-901-01 Rev. B / May 2015 6-73
[:SENSe[1]]:<function>:BIAS:ACTual?
This command returns the amount of current the instrument is sourcing when it makes measurements.
Type Affected by Where saved Default value
Query only
Not applicable
Not applicable
Not applicable
Usage
[:SENSe[1]]:<function>:BIAS:ACTual?
<function>
The function to which the setting applies; see Functions
Functions
VOLTage[:DC]
RESistance
TEMPerature
VOLTage[:DC]:RATio
VOLTage:AC
FRESistance
CONTinuity
DIGitize:VOLTage
CURRent[:DC]
DIODe
FREQuency[:VOLTage]
DIGitize:CURRent
CURRent:AC
CAPacitance
PERiod[:VOLTage]
Details
Returns the bias level: 10 µA, 100 µA, or 1 mA.
Reads the actual amount of current that is sourced by the instrument when a measurement is made.
Example
:FUNC "DIOD"
:DIOD:BIAS:ACTUAL?
Set the function to diode.
Query the actual bias level that is used; example
output:
0.00100351
Also see
[:SENSe[1]]:<function>:BIAS:LEVel (on page 6-74)

Keithley DMM7510 Specifications

General

Brand	Keithley
Model	DMM7510
Category	Multimeter
Language	English