To Next Page

To Previous Page

Section

6: SCPI command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter

Reference Manual

6-136 DMM7510-901-01 Rev. B / May 2015

:SYSTem:BEEPer[:IMMediate]

This command generates an audible tone.

Type Affected by Where saved Default value

Command only Not applicable Not applicable Not applicable

Usage

:SYSTem:BEEPer[:IMMediate] <frequency>, <duration>

The frequency of the beep (20 to 8000 Hz)

The amount of time to play the tone (0.001 to 100 s)

Details

You can use the beeper of the instrument to provide an audible signal at a specific frequency and

time duration.

Using this function from a remote interface does not affect audible errors or key click settings that

were made from the Model DMM7510 front panel.

Example

:SYSTem:BEEPer 500, 1

Beep at 500 Hz for 1 s.

Also see

None

:SYSTem:CLEar

This command clears the event log.

Type Affected by Where saved Default value

Command only

Not applicable

Usage

:SYSTem:CLEar

Details

This command removes all events from the event log, including entries in the front-panel event log.

Also see

:SYSTem:ERRor[:NEXT]? (on page 6-139)

Keithley DMM7510 Reference Manual

Other manuals for Keithley DMM7510