7½ Digit Graphical Sampling Multimeter Reference Manual Section 2:
DMM7510-901-01 Rev. B / May 2015 2-47
Scripts menu
The menus under Scripts in the main menu allow you to configure, run, and manage scripting
operations from the Model DMM7510 front panel. Scripts are blocks of commands that the instrument
can run as a group. The following topics describe the settings that are available on these interactive
screens.
Scripts Run menu
The Run menu contains a list of scripts that you can select to run
immediately. You can also copy a script to a script that runs each time the
instrument power is turned on. You can access scripts that are in the
instrument or on a USB flash drive.
Setting Description
Available Scripts
Displays a list of available scripts that you can select. All scripts
that are saved on the Model DMM7510 or are on a USB flash drive
inserted into the instrument are listed.
Run Selected
Runs the selected script immediately.
Copy to Power Up
Saves the selected script to a script that runs automatically when
the instrument is turned on. The script is saved with the script
Scripts Manage menu
The Manage menu allows you to copy scripts to and from the instrument and the USB
flash drive. You can also delete scripts from the instrument or USB flash drive.
Setting Description
>
Copies a script from the instrument to a USB script. A USB flash
drive must be inserted before you select this option.
<
Copies a script from a USB flash drive to the instrument. A USB
flash drive must be inserted before you select this option.
Delete
Deletes the script that is selected.
For more information about using scripts with the Model DMM7510, see Fundamentals of scripting for
TSP (on page 7-4).
To Next Page
Loading...
Need help?
General
