To Next Page

To Previous Page

Model DMM7510

7½ Digit Graphical Sampling Multimeter Reference Manual Section 6:

SCPI command reference

DMM7510-901-01 Rev. B / May 2015 6-47

:DISPlay:USER<n>:TEXT[:DATA]

This command defines the text that is displayed on the front-panel USER swipe screen.

Type Affected by Where saved Default value

Command only Power cycle Not applicable Not applicable

Usage

:DISPlay:USER<n>:TEXT[:DATA] "<textMessage>"

<n>

The line of the USER swipe screen on which to display text:

• Top line: 1

•

Bottom line: 2

String that contains the message; up to 20 characters for USER1 and

32 characters for

USER2

Details

This command defines text messages for the USER swipe screen.

If you enter too many characters, the instrument displays a warning event and shortens the message

to fit.

Example

DISP:CLE

DISP:SCR SWIPE_USER

DISP:USER1:TEXT "Batch A122"

DISP:USER2:TEXT "Test running"

Clear the USER swipe screen and switch to

display the USER swipe screen.

Set the first line to read "Batch A122" and

the second line to display "Test running".

Also see

:DISPlay:SCReen (on page 6-46)

Keithley DMM7510 Reference Manual

Other manuals for Keithley DMM7510