Keithley DMM7510 Reference Manual

Section
6: SCPI command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter
Reference Manual
6-170 DMM7510-901-01 Rev. B / May 2015
:TRACe:STATistics:PK2Pk?
This command returns the peak-to-peak value of all readings in the reading buffer.
Type Affected by Where saved Default value
Query only
Recall settings
Instrument reset
Power cycle
Not applicable
Not applicable
Usage
:TRACe:STATistics:PK2Pk?
:TRACe:STATistics:PK2Pk? "<bufferName>"
<bufferName>
A string that indicates the reading buffer; the default buffers
(defbuffer1 or defbuffer2) or the name of a user-
defined buffer; if no
buffer is specified,
defbuffer1
is used
Example
TRACe:STAT:PK2Pk?
Returns the peak-to-peak reading value in the default
buffer
defbuffer1
.
TRACe:STAT:PK2Pk? "testData"
Returns the peak-to-peak reading value in the user-
defined buffer
testData
.
Also see
Reading buffers (on page 3-13)
Remote buffer operation (on page 3-30)
:TRACe:MAKE (on page 6-160)
:TRACe:STATistics:AVERage? (on page 6-166)
:TRACe:STATistics:CLEar (on page 6-167)
:TRACe:STATistics:MAXimum? (on page 6-168)
:TRACe:STATistics:MINimum? (on page 6-169)
:TRACe:STATistics:STDDev? (on page 6-170)
:TRACe:STATistics:STDDev?
This command returns the standard deviation of all readings in the buffer.
Type Affected by Where saved Default value
Query only
Recall settings
Instrument reset
Power cycle
Not applicable Not applicable
Usage
:TRACe:STATistics:STDDev?
:TRACe:STATistics:STDDev? "<bufferName>"
<bufferName>
A string that indicates the reading buffer; the default buffers
(defbuffer1 or defbuffer2) or the name of a user-
defined buffer; if no
buffer is specified, defbuffer1 is used

Keithley DMM7510 Specifications

General

Brand	Keithley
Model	DMM7510
Category	Multimeter
Language	English