Keithley DMM7510 Reference Manual

Model DMM7510
7½ Digit Graphical Sampling Multimeter Reference Manual Section 6:
SCPI command reference
DMM7510-901-01 Rev. B / May 2015 6-167
Example
TRACe:STAT:AVERage?
Returns the average reading for the readings in the default
buffer
defbuffer1
.
TRACe:STAT:AVERage? "testData"
Returns the average reading for the readings in the user-
defined buffer
testData
.
Also see
Reading buffers (on page 3-13)
Remote buffer operation (on page 3-30)
:TRACe:MAKE (on page 6-160)
:TRACe:STATistics:CLEar (on page 6-167)
:TRACe:STATistics:MAXimum? (on page 6-168)
:TRACe:STATistics:MINimum? (on page 6-169)
:TRACe:STATistics:PK2Pk? (on page 6-170)
:TRACe:STATistics:STDDev? (on page 6-170)
:TRACe:STATistics:CLEar
This command clears the statistical information associated with the specified buffer.
Type Affected by Where saved Default value
Command only Not applicable Not applicable Not applicable
Usage
:TRACe:STATistics:CLEar
:TRACe:STATistics:CLEar "<bufferName>"
<bufferName>
The name of the reading buffer, which may be a default buffer
(defbuffer1 or defbuffer2) or a user-defined buffer; if no buffer is
defined, clears the statistics from defbuffer1
Details
This command clears the statistics without clearing the readings.
Example
TRACe:STATistics:CLEar
Clear all statistics in defbuffer1.
TRACe:STATistics:CLEar "testData"
Clears all statistics in a user-defined buffer
named
testData
.
Also see
Reading buffers (on page 3-13)
Remote buffer operation (on page 3-30)
:TRACe:MAKE (on page 6-160)
:TRACe:STATistics:AVERage? (on page 6-166)
:TRACe:STATistics:MAXimum? (on page 6-168)
:TRACe:STATistics:MINimum? (on page 6-169)
:TRACe:STATistics:PK2Pk? (on page 6-170)
:TRACe:STATistics:STDDev? (on page 6-170)

Keithley DMM7510 Specifications

General

Brand	Keithley
Model	DMM7510
Category	Multimeter
Language	English