To Next Page

To Previous Page

Model DMM7510

7½ Digit Graphical Sampling Multimeter Reference Manual Section 8:

TSP command reference

DMM7510-901-01 Rev. B / May 2015 8-247

status.questionable.event

This attribute reads the Questionable Event Register.

Type TSP-Link accessible Affected by Where saved Default value

Attribute (R)

Yes

Not applicable

Usage

questionableRegister = status.questionable.event

questionableRegister

The value of the questionable status register (0 to 65535)

Details

This query reads the contents of the questionable status event register. After sending this command

and addressing the instrument to talk, a value is sent to the computer. This value indicates which bits

in the appropriate register are set.

The Questionable Register can be set to the numeric equivalent of the bit to set. To set more than

one bit of the register, set the Questionable Register to the sum of their decimal weights. For

example, to set bits B12 and B13, set the Questionable Register to 12,288 (which is the sum of 4,096

+ 8,192).

Example 1

-- decimal 66 = binary 0100 0010

questionableRegister = 66

status.questionable.enable = questionableRegister

Uses a decimal value to set bits B1 and

B6 of the status questionable enable

Example 2

-- decimal 2560 = binary 00001010 0000 0000

questionableRegister = 2560

status.questionable.enable = questionableRegister

Uses a decimal value to set bits B9 and

B11 of the status questionable enable

Also see

Questionable Event Register (on page 7)

Keithley DMM7510 Reference Manual

Other manuals for Keithley DMM7510