7½ Digit Graphical Sampling Multimeter Reference Manual Section 2:
DMM7510-901-01 Rev. B / May 2015 2-9
Enter information
Some of the menu options open a keypad or keyboard that you can use to enter information. For
example, if you are setting the GPIB address from the front panel, you see the keypad shown in the
following figure.
Figure 3: Front-panel keyboard for GPIB Address entry
You can enter information by touching the screen to select characters and options from the keypad or
keyboard. You can move the cursor in the entry box by touching the screen. The cursor is moved to
the spot in the entry box where you touched the screen. On number keypads, you can also use the
navigation control to move the cursor to a specific number.
On number keypads, you can use the navigation control to set values:
1. Turn the control to underline the character that you want to change.
2. Press the control to select the character for edit.
3. Turn the control to scroll through the options.
4. Press the control to set the character.
5. Press the ENTER key to save the change.
On keyboards and keypads, you can use the navigation control to select characters.
To Next Page
Loading...
Need help?
General
